Yep, we may get a tiny thank-you (read: commission) when you buy through
links on Gadgetspotr — not enough for a yacht, but enough to keep the lights (and
servers) on.
Learn more
37
Highlights
54
Differences
6
Reactions
0
Likes
ANYCUBIC Kobra S1
vs
ELEGOO Centauri Carbon:
37 Highlights & 54 Differences —
So, Which 3D Printer Actually Works Better
A simple guide for picking a printer tailored to your experience level and project demands.
What sets ANYCUBIC Kobra S1 apart from ELEGOO Centauri Carbon? This 3d printers face-off compares specs like print log storage, width, weight & package depth and beyond.
ANYCUBIC Kobra S1 vs ELEGOO Centauri Carbon: Comparing Two 3D Printing Powerhouses
Both the ANYCUBIC Kobra S1 and the ELEGOO Centauri Carbon are FDM/FFF 3D printers crafted to meet the needs of consumer users. Still, they clearly target different expertise levels and use cases. Both printers come as prebuilt units requiring some assembly, feature a single direct drive extruder, and support PEI magnetic flex build plates for reliable print adhesion. However, the Kobra S1 is geared toward beginners with simpler hardware and faster max speeds. At the same time, Centauri Carbon elevates the experience with advanced connectivity, larger build volume, and professional-grade material support.
In terms of build volume, the ELEGOO offers a generous 1023.79 cm³ workspace, outstripping the Kobra S1's 738.44 cm³, allowing room for bigger or multiple-part prints. Both printers use 1.75mm filament and provide heated beds up to 230°C, but the Centauri Carbon supports a higher extruder temperature ceiling of 572°F (300°C), ideal for more exotic filaments.
ELEGOO Centauri Carbon: A Feature-Rich Workhorse for the Ambitious Maker
The ELEGOO Centauri Carbon stands out with its sophisticated CoreXY motion system enhanced by linear rails for robust structural stability and improved print precision. While its official max print speed is lower at 250 mm/s compared to the Kobra S1, the Centauri Carbon compensates with advanced features like vibration compensation, which minimizes print artifacts.
Connectivity is where the Centauri Carbon truly shines. It boasts built-in Wi-Fi and LAN capabilities, remote monitoring, and cloud-based software support; features absent in the Kobra S1. The inclusion of a built-in camera and lighting inside the print chamber enables users to keep tabs on prints in real-time with added flexibility, such as time-lapse recording.
Material compatibility here is also broader. The Centauri Carbon supports challenging filaments like Nylon, Carbon Fiber composites, and ASA, thanks to its higher extruder temperature range and filament conditioning features like a filament dry box. Additionally, its smart firmware provides auto bed leveling, filament runout detection, and thoughtful safety mechanisms like auto shutdown on errors and remote error alerts, ideal for unattended long prints.
Despite these capabilities, the ELEGOO's overall noise level is approximately 50 dB, slightly louder than the Kobra S1 but still within reasonable limits for most workshops. Its price range, between $272.47 and $299.99 $at Elegoo, makes it an attractive choice for serious hobbyists seeking great value without compromising on technology.
ANYCUBIC Kobra S1: Simplicity and Speed for Entry-Level to Enthusiast Users
The ANYCUBIC Kobra S1 offers an approachable package for beginners or those upgrading from basic printers. Leveraging a Cartesian frame with rods and belts, it delivers stability while maintaining a lightweight footprint of just under 19 pounds, making it easier to accommodate in limited spaces.
Its official max print speed of 600 mm/s, much higher than the Centauri Carbon's, suits users needing faster turnaround for prototyping and small-scale production. The printer shines at printing PLA, ABS, PETG, and TPU, handling flexible and common filaments well. The direct drive extruder supports a variety of nozzle sizes (from 0.2mm to 0.8mm) for versatile layer resolutions, and its auto-first-layer calibration makes setup less daunting.
Your prints benefit from features such as filament runout sensors, power-loss recovery, and a 4.3-inch touchscreen for streamlined control. A noise level of 49 dB slightly edges out the Centauri Carbon for quieter operation, contributing to a more comfortable workspace. Connectivity is limited to USB and SD card interfaces without network options or remote monitoring, which might restrict multitasking capabilities but keeps the system simple.
With a 1-year warranty and a $359 price point $at Anycubic Store, the Kobra S1 offers an economic yet competent entry into desktop 3D printing without overwhelming features.
Quick Take
The ELEGOO Centauri Carbon excels with its outstanding build volume, advanced CoreXY mechanics, and professional connectivity features. Meanwhile, the ANYCUBIC Kobra S1 appeals through its superior speed, beginner-friendly operation, and straightforward hardware reliability.
Bottom Line Recommendation
For users who demand versatility, high-end features, and expansive material support at a lower price, the ELEGOO Centauri Carbon is the better pick. Alternatively, if quick prints, ease of use, and a compact form factor are your priorities, the ANYCUBIC Kobra S1 remains a solid and affordable contender for newcomers and casual makers.
Verdict
Winner: ELEGOO Centauri Carbon - Larger build volume, advanced connectivity, professional-grade features, and lower price make it ideal for intermediate to advanced users.
Runner-up: ANYCUBIC Kobra S1 - Faster print speeds, beginner-friendly setup, and a quieter operation suit those new to 3D printing or valuing simplicity.
Side by side. The numbers. The features. No drama.
We compared ANYCUBIC Kobra S1 and ELEGOO Centauri Carbon the way spec nerds would: full breakdowns, user talk, use cases, and performance facts that matter.
The ELEGOO Centauri Carbon is well-suited for Prototyping, enabling quick iterations and physical validation of designs across various industries.
Lists the most common applications supported.
In the battle of Supported Applications,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Applications on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The product comes with a 1 Year warranty period, covering manufacturing defects and ensuring customer support for a defined duration.
Coverage period offered by the manufacturer.
In the battle of Warranty Period,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Warranty Period on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Assembly Type
What is the assembly type?
0
ANYCUBIC Kobra S1
0Votes
Prebuilt
0
ELEGOO Centauri Carbon
0Votes
Prebuilt
ANYCUBIC Kobra S1
While categorized as Prebuilt, the Anycubic Kobra S1 still requires some minor assembly steps, typical for many desktop 3D printers that come partially pre-assembled to reduce shipping size.
ELEGOO Centauri Carbon
The printer comes Prebuilt, significantly reducing setup time and allowing users to start printing almost immediately after unboxing.
Shows whether the printer is sold as a kit requiring assembly or fully prebuilt.
In the battle of Assembly Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Printer Type
What type of printer is it?
0
ANYCUBIC Kobra S1
0Votes
FDM/FFF
0
ELEGOO Centauri Carbon
0Votes
FDM/FFF
ELEGOO Centauri Carbon
This is an FDM/FFF (Fused Deposition Modeling/Fused Filament Fabrication) 3D printer, a common technology that builds objects layer by layer by extruding melted thermoplastic filament.
Defines the printing technology used by the machine.
In the battle of Printer Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Printer Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Target User Level
What is the target user level?
0
ANYCUBIC Kobra S1
0Votes
Beginner
0
ELEGOO Centauri Carbon
0Votes
Intermediate, Advanced, Professional
vs
Target User Level
The ANYCUBIC Kobra S1 is designed for Beginner users, whereas the ELEGOO Centauri Carbon targets Intermediate, Advanced, and Professional users, indicating a higher skill requirement or more advanced features.
Indicates the recommended skill level.
In the battle of Target User Level,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Target User Level on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Upgrade Path
Does it support an upgrade path?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The printer offers an upgrade path, meaning it can be enhanced with additional features or components in the future to expand its capabilities.
Whether the printer can be expanded with official or third-party upgrades.
In the battle of Upgrade Path,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Path on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Product Name,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Product Name on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Model Number
What is the model number?
0
ANYCUBIC Kobra S1
0Votes
Kobra S1
0
ELEGOO Centauri Carbon
0Votes
Centauri Carbon
Manufacturer’s reference code for precise identification.
In the battle of Model Number,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Model Number on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Release Year
What is the release year?
0
ANYCUBIC Kobra S1
0Votes
2023
0
ELEGOO Centauri Carbon
0Votes
2023
The year the 3D printer was first released.
In the battle of Release Year,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Release Year on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Intended Use
What is the intended use?
0
ANYCUBIC Kobra S1
0Votes
Consumer
0
ELEGOO Centauri Carbon
0Votes
Consumer, Professional
vs
Intended Use
ELEGOO Centauri Carbon is intended for both Consumer and Professional use, offering more versatility, while ANYCUBIC Kobra S1 focuses solely on Consumer use.
Identifies the main user category.
In the battle of Intended Use,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Intended Use on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Assembly Required
Is assembly required?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
States if the printer requires assembly.
In the battle of Assembly Required,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Assembly Required on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Country of Origin
What is the country of origin?
0
ANYCUBIC Kobra S1
0Votes
China
0
ELEGOO Centauri Carbon
0Votes
China
The country where the product is designed or manufactured.
In the battle of Country of Origin,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Country of Origin on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon is considerably heavier at 34.17 lbs (approx. 15.5 kg) compared to the ANYCUBIC Kobra S1's 18.74 lbs (approx. 8.5 kg). The Centauri Carbon is a more substantial machine, potentially offering more stability.
Net weight of the printer.
In the battle of Weight,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
15.4 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Weight on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The package depth measures 21.26 inches (54.00 cm), providing essential dimensions for shipping and storage planning.
Depth of the printer’s packaging.
In the battle of Package Depth,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
2.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Depth on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon is wider at 17.91 inches (approximately 45.49 cm) compared to the ANYCUBIC Kobra S1's 16.73 inches (approximately 42.49 cm), meaning the Centauri Carbon takes up slightly more horizontal space.
The total external width of the printer.
In the battle of Width,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
1.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Width on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Package Height
What is the package height?
10.04
inch
0Votes
25.59
inch
0Votes
ANYCUBIC Kobra S1
The height of the printer's package is approximately 10.04 inch (25.5 cm).
ELEGOO Centauri Carbon
The package height is 25.59 inches (65.00 cm), an important measurement for logistics and storage considerations prior to setup.
Height of the printer’s packaging.
In the battle of Package Height,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
15.6 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Height on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Depth
What is the printer’s depth?
15.94
inch
0Votes
18.9
inch
0Votes
vs
Depth
The ELEGOO Centauri Carbon has a depth of 18.9 inches (approx. 48.01 cm), which is larger than the ANYCUBIC Kobra S1's depth of 15.94 inches (approx. 40.49 cm). The Centauri Carbon will require more counter or desk space.
The total external depth of the printer.
In the battle of Depth,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
3.0 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Depth on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Height
What is the printer’s height?
18.11
inch
0Votes
22.68
inch
0Votes
vs
Height
With a height of 22.68 inches (approx. 57.6 cm), the ELEGOO Centauri Carbon is significantly taller than the ANYCUBIC Kobra S1, which stands at 18.11 inches (approx. 46.0 cm). The Centauri Carbon might need more vertical clearance.
The total external height of the printer.
In the battle of Height,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
4.6 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Height on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Package Width
What is the package width?
18.11
inch
0Votes
21.65
inch
0Votes
ELEGOO Centauri Carbon
The package width is 21.65 inches (54.99 cm), which helps in determining the necessary space for receiving and unpacking the product.
Width of the printer’s packaging.
In the battle of Package Width,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
3.5 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Width on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Package Weight
What is the package weight?
24.04
lbs
0Votes
44.09
lbs
0Votes
vs
Package Weight
The ELEGOO Centauri Carbon has a package weight of 44.09 lbs (approx. 20 kg), significantly more than the ANYCUBIC Kobra S1's 24.04 lbs (approx. 10.9 kg). This suggests the Centauri Carbon is packed with more components or is generally heavier.
total shipping weight including packaging.
In the battle of Package Weight,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
20.1 lbs
measurement.
Don’t keep it to yourself — be the first to react and review the
Package Weight on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build-to-Printer Size Ratio
What is the build-to-printer size ratio?
15.27
%
0Votes
18.6
%
0Votes
vs
Build-to-Printer Size Ratio
The ELEGOO Centauri Carbon boasts an 18.6% build-to-printer size ratio, which is more efficient in space utilization for its build area than the ANYCUBIC Kobra S1's 15.27%. This means the Centauri Carbon provides a larger print volume relative to its overall footprint.
The efficiency ratio of build volume relative to the overall printer size.
In the battle of Build-to-Printer Size Ratio,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
3.3 %
measurement.
Don’t keep it to yourself — be the first to react and review the
Build-to-Printer Size Ratio on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Folded Width
What is the folded width?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Width of the printer when folded (if applicable).
Don’t keep it to yourself — be the first to react and review the
Folded Width on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Folded Depth
What is the folded depth?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Depth of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Depth on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Folded Height
What is the folded height?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Height of the printer when folded.
Don’t keep it to yourself — be the first to react and review the
Folded Height on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Space Requirement
What is the space requirement?
1.85
sq ft
0Votes
2
sq ft
0Votes
vs
Space Requirement
The ELEGOO Centauri Carbon requires 2 sq ft of space, slightly more than the ANYCUBIC Kobra S1, which needs 1.85 sq ft. Both printers require a similar amount of operational space.
The minimum flat surface area needed to safely place the printer.
In the battle of Space Requirement,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
0.2 sq ft
measurement.
Don’t keep it to yourself — be the first to react and review the
Space Requirement on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Environmental & Power
9
Operating Humidity Range
What is the operating humidity range?
0
ANYCUBIC Kobra S1
0Votes
20-80%
0
ELEGOO Centauri Carbon
0Votes
20-80%
ANYCUBIC Kobra S1
This range indicates the recommended humidity for optimal operation of the 3D printer, preventing issues like filament moisture absorption or static electricity buildup.
Acceptable humidity range during printer operation.
In the battle of Operating Humidity Range,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Humidity Range on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Power Supply Type
What type of power supply does it use?
0
ANYCUBIC Kobra S1
0Votes
Internal
0
ELEGOO Centauri Carbon
0Votes
Internal
ANYCUBIC Kobra S1
The printer features an Internal power supply, which contributes to a cleaner and more compact setup by integrating the power brick within the printer's chassis.
Indicates whether the printer uses an internal or external power supply.
In the battle of Power Supply Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Power Consumption
What is the power consumption?
350
Watt
1Votes
400
Watt
0Votes
vs
Power Consumption
The ELEGOO Centauri Carbon has a higher power consumption of 400 Watts compared to the ANYCUBIC Kobra S1's 350 Watts. The Centauri Carbon consumes more power during operation.
Average power usage during active printing.
In the battle of Power Consumption,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
50.0 Watt
measurement.
Based on community votes for Power Consumption,
ANYCUBIC Kobra S1 ◉ earned
1 votes,
more than
ELEGOO Centauri Carbon ◉,
which got 0 votes.
The Kobra S1 uses less power at 350 Watts compared to the Centauri Carbon's 400 Watts. It's a small difference but definitely a plus for long print jobs and overall energy efficiency.
See more
Operating Temperature Range
What is the operating temperature range?
0
ANYCUBIC Kobra S1
0Votes
46.4-104°F
0
ELEGOO Centauri Carbon
0Votes
50-95°F
vs
Operating Temperature Range
The ANYCUBIC Kobra S1 has a broader operating temperature range of 46.4-104°F (8-40°C), while the ELEGOO Centauri Carbon operates within a slightly narrower range of 50-95°F (10-35°C). The Kobra S1 offers more flexibility in varying room conditions.
Recommended ambient temperature range for safe operation.
In the battle of Operating Temperature Range,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Operating Temperature Range on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Storage Temperature Range
What is the storage temperature range?
0
ANYCUBIC Kobra S1
0Votes
41-113°F
0
ELEGOO Centauri Carbon
0Votes
32-104°F
vs
Storage Temperature Range
The ANYCUBIC Kobra S1 can be stored in temperatures ranging from 41-113°F (5-45°C), while the ELEGOO Centauri Carbon supports a range of 32-104°F (0-40°C). The Centauri Carbon can tolerate colder storage, but the Kobra S1 tolerates higher temperatures.
Safe temperature range for storing the printer when not in use.
In the battle of Storage Temperature Range,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Temperature Range on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Storage Humidity Range
What is the storage humidity range?
0
ANYCUBIC Kobra S1
0Votes
20-85%
0
ELEGOO Centauri Carbon
0Votes
10-90%
vs
Storage Humidity Range
The ELEGOO Centauri Carbon offers a wider storage humidity range of 10-90% compared to the ANYCUBIC Kobra S1's 20-85%. The Centauri Carbon provides more tolerance for humidity variations during storage.
Safe humidity range for storing the printer.
In the battle of Storage Humidity Range,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Storage Humidity Range on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Power Supply Voltage
What is the required power supply voltage?
0
ANYCUBIC Kobra S1
0Votes
100-240 Volt
0
ELEGOO Centauri Carbon
0Votes
100-240 Volt
Voltage input supported by the printer’s power supply.
In the battle of Power Supply Voltage,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Supply Voltage on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Idle Power Consumption
What is the idle power consumption?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Power drawn while the printer is on but not printing.
Don’t keep it to yourself — be the first to react and review the
Idle Power Consumption on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Energy Saving Mode
Does it have energy saving mode?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Whether the printer includes an energy-saving or eco mode.
In the battle of Energy Saving Mode,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Energy Saving Mode on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon has a higher maximum layer resolution of 350 microns compared to the ANYCUBIC Kobra S1's 300 microns. The Centauri Carbon can print faster with thicker layers, ideal for less detailed or large models.
Thickest layer height achievable.
In the battle of Layer Resolution Maximum,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
50.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Maximum on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon supports a wider range of optional nozzle sizes, including 0.2mm, 0.4mm, 0.6mm, and 0.8mm, whereas the ANYCUBIC Kobra S1 supports 0.2mm, 0.6mm, and 0.8mm, missing the 0.4mm option. The Centauri Carbon provides more flexibility for different print requirements.
Alternative nozzle sizes supported.
In the battle of Optional Nozzle Sizes,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Optional Nozzle Sizes on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Min Extruder Temperature,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
9.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Min Extruder Temperature on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Dual Extruders,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Dual Extruders on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Whether the printer supports independent extruder heads.
In the battle of Independent Dual Extruder,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Independent Dual Extruder on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Standard Nozzle Diameter
What is the standard nozzle diameter?
0.4
mm
0Votes
0.4
mm
0Votes
ANYCUBIC Kobra S1
The standard nozzle diameter of 0.4mm is commonly used, providing a good balance between print speed and detail for most FDM 3D printing applications.
ELEGOO Centauri Carbon
The standard nozzle diameter is 0.4 mm, offering a versatile balance between printing speed and the level of detail achievable for a wide range of applications.
Default nozzle diameter provided.
In the battle of Standard Nozzle Diameter,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
, delivering
equal
0.40 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Standard Nozzle Diameter on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Diameter Supported
What filament diameter is supported?
1.75
mm
0Votes
1.75
mm
0Votes
ANYCUBIC Kobra S1
The printer is designed to use 1.75mm diameter filament, which is the most common size for FDM 3D printers.
ELEGOO Centauri Carbon
The printer is designed to support the widely used 1.75 mm filament diameter, ensuring compatibility with a broad selection of materials from various manufacturers.
The filament size compatible with printer.
In the battle of Filament Diameter Supported,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Filament Diameter Supported on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build Volume
What is the build volume?
738.44
cubic in
0Votes
1,023.79
cubic in
1Votes
vs
Build Volume
The ELEGOO Centauri Carbon has a significantly larger build volume of 1023.79 cubic inches (approx. 16.78 L) compared to the ANYCUBIC Kobra S1's 738.44 cubic inches (approx. 12.1 L). The Centauri Carbon is better for printing larger objects.
total printable volume capacity.
In the battle of Build Volume,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
285.4 cubic in
measurement.
Based on community votes for Build Volume,
ANYCUBIC Kobra S1 ◉ earned
0 votes,
less than
ELEGOO Centauri Carbon ◉,
which got 1 votes.
For larger models, the Centauri Carbon's build volume is definitely superior. An extra 300 cubic inches really makes a difference when I'm working on bigger projects.
See more
Build Width
What is the build width?
8.66
inch
0Votes
10.08
inch
0Votes
vs
Build Width
The ELEGOO Centauri Carbon offers a wider build width of 10.08 inches (approx. 25.6 cm) compared to the ANYCUBIC Kobra S1's 8.66 inches (approx. 22.0 cm). The Centauri Carbon allows for larger prints in width.
Maximum printable width of the build area.
In the battle of Build Width,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
1.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Width on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build Height
What is the build height?
9.84
inch
0Votes
10.08
inch
0Votes
vs
Build Height
The ELEGOO Centauri Carbon's build height is 10.08 inches (approx. 25.6 cm), marginally taller than the ANYCUBIC Kobra S1's 9.84 inches (approx. 25.0 cm). Both offer substantial vertical build space.
Maximum printable height of the build area.
In the battle of Build Height,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
0.2 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Height on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Layer Resolution Minimum
What is the minimum layer resolution?
50
microns
0Votes
100
microns
0Votes
vs
Layer Resolution Minimum
The ANYCUBIC Kobra S1 achieves a finer minimum layer resolution of 50 microns, offering more detailed prints than the ELEGOO Centauri Carbon, which has a minimum resolution of 100 microns. The Kobra S1 is better for intricate details.
Finest layer height achievable.
In the battle of Layer Resolution Minimum,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
50.0 microns
measurement.
Don’t keep it to yourself — be the first to react and review the
Layer Resolution Minimum on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Max Bed Temperature
What is the max bed temperature?
230
°F
0Votes
230
°F
0Votes
ELEGOO Centauri Carbon
The maximum bed temperature of 230 °F (110 °C) allows for printing with a diverse range of filaments, including those that require higher temperatures for optimal adhesion and reduced warping, such as ABS and PETG.
Maximum heated bed temperature.
In the battle of Max Bed Temperature,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
, delivering
equal
230.00 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Bed Temperature on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build Depth
What is the build depth?
8.66
inch
0Votes
10.08
inch
0Votes
vs
Build Depth
The ELEGOO Centauri Carbon provides a build depth of 10.08 inches (approx. 25.6 cm), which is greater than the ANYCUBIC Kobra S1's 8.66 inches (approx. 22.0 cm). This means the Centauri Carbon can accommodate deeper models.
Maximum printable depth of the build area.
In the battle of Build Depth,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
1.4 inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Build Depth on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Max Extruder Temperature
What is the max extruder temperature?
500
°F
0Votes
572
°F
0Votes
vs
Max Extruder Temperature
The ELEGOO Centauri Carbon's maximum extruder temperature of 572°F (300°C) is higher than the ANYCUBIC Kobra S1's 500°F (260°C). This allows the Centauri Carbon to print with a wider range of high-performance and specialty filaments.
Maximum heating capability of extruder.
In the battle of Max Extruder Temperature,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
, delivering
lower
72.0 °F
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Extruder Temperature on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Bed Temperature Gradient
What is the bed temperature gradient?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Variance in heat across the bed surface.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Gradient on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Heated Chamber
Does the printer have a heated chamber?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Whether the printer has a heated build chamber.
In the battle of Heated Chamber,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Heated Chamber on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Chamber Temperature Control Range
What is the chamber temperature control range?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Range of temperatures the printer chamber can maintain
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Control Range on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Number of Extruders
How many extruders does the printer have?
0
ANYCUBIC Kobra S1
0Votes
1
0
ELEGOO Centauri Carbon
0Votes
1
total extruders installed.
In the battle of Number of Extruders,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Number of Extruders on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Quick-Swap Nozzles
Does it have quick-swap nozzles?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Nozzles can be quickly swapped without tools.
In the battle of Quick-Swap Nozzles,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Quick-Swap Nozzles on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Hotend Replaceable
Is the hotend replaceable?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Whether the hotend can be replaced.
In the battle of Hotend Replaceable,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Hotend Replaceable on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Extruder Drive Type
What type of extruder drive does it use?
0
ANYCUBIC Kobra S1
0Votes
Direct Drive
0
ELEGOO Centauri Carbon
0Votes
Direct Drive
The type of filament feeding system.
In the battle of Extruder Drive Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Drive Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon supports a broader array of filament types, including Nylon, Carbon Fiber, and ASA, in addition to PLA, PETG, ABS, and TPU. The ANYCUBIC Kobra S1 only supports PLA, ABS, PETG, and TPU, making the Centauri Carbon more versatile for advanced materials.
Filament materials that the printer can process.
In the battle of Supported Filament Types,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Based on community votes for Supported Filament Types,
ANYCUBIC Kobra S1 ◉ earned
0 votes,
less than
ELEGOO Centauri Carbon ◉,
which got 1 votes.
The ELEGOO Centauri Carbon offers a much wider range of supported filament types. Being able to print with Carbon Fiber and Nylon opens up so many more possibilities for advanced prints.
In the battle of Supported Resin Types,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Resin Types on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Light wavelength compatibility for curing resins.
Don’t keep it to yourself — be the first to react and review the
Compatible Resin Wavelength on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Maximum amount of resin the tank can hold.
Don’t keep it to yourself — be the first to react and review the
Max Resin Tank Capacity on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Third-Party Material
Does it support third-party materials?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The printer supports the use of third-party filaments, giving users flexibility to choose from a wider range of materials and brands beyond Anycubic's own offerings.
ELEGOO Centauri Carbon
The printer supports third-party materials, offering users the freedom to choose from a vast selection of filament brands and types, rather than being restricted to proprietary options.
Ability to use non-proprietary materials.
In the battle of Third-Party Material,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Third-Party Material on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Max Supported Filament Diameter
What is the maximum supported filament diameter?
1.75
mm
0Votes
1.75
mm
0Votes
ELEGOO Centauri Carbon
The printer is capable of accommodating filament with a maximum diameter of 1.75 mm, ensuring compatibility with the most common filament standard available.
Maximum filament diameter that can be used.
In the battle of Max Supported Filament Diameter,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
, delivering
equal
1.75 mm
measurement.
Don’t keep it to yourself — be the first to react and review the
Max Supported Filament Diameter on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Max Number of Materials Supported
What is the maximum number of materials supported?
0
ANYCUBIC Kobra S1
0Votes
1
0
ELEGOO Centauri Carbon
0Votes
1
ELEGOO Centauri Carbon
The printer supports a maximum of 1 material at a time, suitable for single-color or single-material prints.
Maximum distinct materials supported in one job.
In the battle of Max Number of Materials Supported,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Max Number of Materials Supported on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Dry Box
Does it support filament dry boxes?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Filament Dry Box
The ELEGOO Centauri Carbon includes a Filament Dry Box, which is unavailable for the ANYCUBIC Kobra S1. This feature on the Centauri Carbon helps maintain filament quality for better prints.
Supports use of a dry box to prevent filament moisture issues.
In the battle of Filament Dry Box,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Dry Box on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Auto-Loading
Does it have filament auto-loading?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Automatic feeding of filament into extruder.
In the battle of Filament Auto-Loading,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Auto-Loading on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Drying Required
Is filament drying required?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Filament Drying Required
Filament drying is required for the ELEGOO Centauri Carbon, which is not specified for the ANYCUBIC Kobra S1. This indicates the Centauri Carbon supports materials that benefit from or require drying for optimal performance.
Whether drying filament before use is necessary.
In the battle of Filament Drying Required,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Drying Required on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Multi-Material Printing
Can it print with multiple materials?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Ability to print with multiple materials simultaneously.
In the battle of Multi-Material Printing,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Material Printing on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Resin Auto-Fill
Does it have resin auto-fill?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Automatic filling of resin during prints.
In the battle of Resin Auto-Fill,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Auto-Fill on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Biocompatible Materials Support
Does it support biocompatible materials?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Supports resins/filaments approved for medical or dental use.
In the battle of Biocompatible Materials Support,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Biocompatible Materials Support on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ANYCUBIC Kobra S1 boasts a significantly higher official maximum print speed of 600 mm/s, while the ELEGOO Centauri Carbon has an official maximum print speed of 250 mm/s. The Kobra S1 is designed for much faster printing.
Manufacturer-claimed maximum print speed.
In the battle of Official Max Print Speed,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
higher
350.0 mm/s
measurement.
Based on community votes for Official Max Print Speed,
ANYCUBIC Kobra S1 ◉ earned
1 votes,
more than
ELEGOO Centauri Carbon ◉,
which got 0 votes.
The Kobra S1's official max print speed is way higher. That 600 mm/s would really speed up my projects, making it a clear winner for me in terms of efficiency.
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Longest unsupported horizontal span printed without sagging.
Don’t keep it to yourself — be the first to react and review the
Bridging Performance on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
First Layer Calibration
How is the first layer calibrated?
0
ANYCUBIC Kobra S1
0Votes
Auto
0
ELEGOO Centauri Carbon
0Votes
Auto
ELEGOO Centauri Carbon
The printer is equipped with Auto first layer calibration, which automatically adjusts the nozzle's Z-height to ensure optimal adhesion for the initial print layer, crucial for print success.
Method used for first-layer bed calibration.
In the battle of First Layer Calibration,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
First Layer Calibration on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Print Adhesion Type
What type of print adhesion is used?
0
ANYCUBIC Kobra S1
0Votes
PEI
0
ELEGOO Centauri Carbon
0Votes
PEI
ANYCUBIC Kobra S1
The printer uses a PEI (Polyetherimide) print adhesion surface, which is popular for its excellent print adhesion during printing and easy part removal once the bed cools.
Method used to secure prints to the bed.
In the battle of Print Adhesion Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Adhesion Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Print Recovery
Does the printer support print recovery?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The printer features print recovery capabilities, allowing it to resume a print job after an unexpected power outage or filament runout, minimizing wasted material and time.
Ability to resume print after power loss or interruption.
In the battle of Print Recovery,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Recovery on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Operating Noise Level
What is the operating noise level?
49
dB
1Votes
50
dB
0Votes
vs
Operating Noise Level
The ANYCUBIC Kobra S1 operates at a slightly quieter 49 dB compared to the ELEGOO Centauri Carbon's 50 dB. Both printers operate at similar noise levels, suitable for most environments.
Measures the sound generated during printing; lower is quieter.
In the battle of Operating Noise Level,
ANYCUBIC Kobra S1 ◉ is
better than
ELEGOO Centauri Carbon ◉
, delivering
lower
1.0 dB
measurement.
Based on community votes for Operating Noise Level,
ANYCUBIC Kobra S1 ◉ earned
1 votes,
more than
ELEGOO Centauri Carbon ◉,
which got 0 votes.
The Kobra S1 being slightly quieter at 49 dB is a small win for my workspace. Even a single decibel difference can add up during long printing sessions.
See more
Measured Effective Print Speed
What is the effective measured print speed?
100
mm/s
0Votes
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
vs
Measured Effective Print Speed
The ANYCUBIC Kobra S1 has a measured effective print speed of 100 mm/s, whereas this information is not available for the ELEGOO Centauri Carbon. This provides a practical speed metric for the Kobra S1.
Independently measured real-world print speed.
Don’t keep it to yourself — be the first to react and review the
Measured Effective Print Speed on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Time to Print Benchy
How long does it take to print a Benchy?
51
minutes
0Votes
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
vs
Time to Print Benchy
The ANYCUBIC Kobra S1 can print a Benchy in 51 minutes, a benchmark time which is not available for the ELEGOO Centauri Carbon. This gives an indication of real-world print speed for the Kobra S1.
Average time to complete the benchmark “Benchy” model.
Don’t keep it to yourself — be the first to react and review the
Time to Print Benchy on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Print Accuracy
What is the print accuracy?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Degree of dimensional accuracy of printed parts.
Don’t keep it to yourself — be the first to react and review the
Print Accuracy on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Overhang Performance
What is the overhang performance?
60
degrees
0Votes
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Maximum angle of unsupported overhangs achievable.
Don’t keep it to yourself — be the first to react and review the
Overhang Performance on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Spaghetti/Fault Detection
Does it have spaghetti or fault detection?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Spaghetti/Fault Detection
The ELEGOO Centauri Carbon features Spaghetti/Fault Detection, a capability not specified for the ANYCUBIC Kobra S1. This enhances print reliability by detecting and mitigating errors during printing for the Centauri Carbon.
Detects failed prints or filament tangles.
In the battle of Spaghetti/Fault Detection,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Spaghetti/Fault Detection on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Continuous Print Time
What is the max continuous print time?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Maximum supported printing time without interruption.
Don’t keep it to yourself — be the first to react and review the
Continuous Print Time on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Print Success Rate
What is the print success rate?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Percentage of prints successfully completed.
Don’t keep it to yourself — be the first to react and review the
Print Success Rate on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Idle Noise Level
What is the idle noise level?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Measures the noise when printer is on but not printing; lower is better.
Don’t keep it to yourself — be the first to react and review the
Idle Noise Level on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Print Quality Rating
What is the print quality rating?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Rated score for overall print quality (0–10).
Don’t keep it to yourself — be the first to react and review the
Print Quality Rating on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The printer has an Open enclosure, which allows for easy access to the print area but may be less suitable for printing warp-prone materials like ABS without additional modifications.
ELEGOO Centauri Carbon
The printer features an Open enclosure design, which provides easy access to the print area but may not be ideal for printing with materials highly susceptible to temperature fluctuations without an additional enclosure.
Whether the printer has an open or enclosed build chamber.
In the battle of Enclosure,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The printer uses a PEI, Magnetic, and Flex build plate, combining strong adhesion, easy attachment/removal, and effortless print retrieval by bending the flexible plate.
ELEGOO Centauri Carbon
The printer features a PEI (Polyetherimide) build plate, known for its excellent print adhesion. Being both magnetic and flexible, it allows for easy removal of completed prints by simply bending the plate.
Type of build surface material.
In the battle of Build Plate Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Air Filtration
What type of air filtration is included?
0
ANYCUBIC Kobra S1
0Votes
None
0
ELEGOO Centauri Carbon
0Votes
None
ANYCUBIC Kobra S1
The printer does not include built-in air filtration, so it's recommended to operate it in a well-ventilated area, especially when printing with materials like ABS that can release fumes.
ELEGOO Centauri Carbon
This 3D printer does not come with an integrated air filtration system. For safe operation, it is advisable to use it in a well-ventilated space or with an external air filtration solution to manage fumes and ultrafine particles.
Air filtering system for reducing fumes and particulates.
In the battle of Air Filtration,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Filtration on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Toolhead Modularity
What modular toolheads are supported?
0
ANYCUBIC Kobra S1
0Votes
None
0
ELEGOO Centauri Carbon
0Votes
None
ANYCUBIC Kobra S1
The printer does not feature toolhead modularity, meaning it is dedicated solely to 3D printing and cannot be easily converted for other functions like laser engraving or CNC milling.
ELEGOO Centauri Carbon
The printer does not offer toolhead modularity, meaning its functionality is dedicated to FDM 3D printing without options for interchanging with other tool types like laser engravers or CNC mills.
Whether the toolhead can be swapped for other functions.
In the battle of Toolhead Modularity,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Toolhead Modularity on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Touchscreen Display
Does it have a touchscreen display?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ELEGOO Centauri Carbon
A touchscreen display is integrated, which simplifies navigation and control of the printer's functions and settings directly from the device.
Indicates if a touchscreen is provided for controls.
In the battle of Touchscreen Display,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Touchscreen Display on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Screen Size
What is the display screen size?
4.3
Inch
0Votes
4.3
Inch
0Votes
ELEGOO Centauri Carbon
The printer is equipped with a 4.3 Inch (10.92 cm) screen, providing a compact yet clear interface for operational control.
Size of the display screen.
In the battle of Screen Size,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
, delivering
equal
4.30 Inch
measurement.
Don’t keep it to yourself — be the first to react and review the
Screen Size on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build Plate Surface Texture
What is the build plate texture?
0
ANYCUBIC Kobra S1
0Votes
Textured
0
ELEGOO Centauri Carbon
0Votes
Textured
ANYCUBIC Kobra S1
The Textured build plate surface enhances print adhesion for the first layer and often makes removing finished prints easier once cooled.
Surface finish of the build plate.
In the battle of Build Plate Surface Texture,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Surface Texture on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Build Plate Removable
Is the build plate removable?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ELEGOO Centauri Carbon
The build plate is removable, which greatly facilitates the process of detaching finished prints and simplifies maintenance tasks.
Whether the build plate can be detached for print removal.
In the battle of Build Plate Removable,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Build Plate Removable on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Auto Bed Leveling
Does it support auto bed leveling?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ELEGOO Centauri Carbon
Automatic bed leveling is a key feature, as it automatically detects and compensates for any unevenness on the print bed, ensuring a perfect first layer and consistent print quality without manual intervention.
Automatic calibration of the print bed.
In the battle of Auto Bed Leveling,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Bed Leveling on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Runout Sensor
Does it have a filament runout sensor?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ELEGOO Centauri Carbon
A filament runout sensor is included, which automatically detects when filament runs out and pauses the print, preventing failed jobs and allowing for convenient filament changes.
Detects when filament runs out and pauses printing.
In the battle of Filament Runout Sensor,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Runout Sensor on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Power Loss Recovery
Does it support power loss recovery?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The power loss recovery feature allows the printer to resume a print from where it left off after an unexpected power interruption, preventing print failures and material waste.
Recovers print jobs after power interruptions.
In the battle of Power Loss Recovery,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Power Loss Recovery on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Cooling Fans
Does it have cooling fans?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The printer includes cooling fans, which are crucial for rapidly solidifying extruded filament, preventing warping and improving overhang quality.
Fans for cooling extruder and printed layers.
In the battle of Cooling Fans,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Cooling Fans on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Built-in Camera
Does it have a built-in camera?
No
0Votes
ANYCUBIC Kobra S1
Yes
1Votes
ELEGOO Centauri Carbon
vs
Built-in Camera
The ELEGOO Centauri Carbon includes a built-in camera, which is not available on the ANYCUBIC Kobra S1. This feature on the Centauri Carbon allows for remote monitoring of prints.
Camera for monitoring prints and creating time-lapses.
In the battle of Built-in Camera,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Based on community votes for Built-in Camera,
ANYCUBIC Kobra S1 ◉ earned
0 votes,
less than
ELEGOO Centauri Carbon ◉,
which got 1 votes.
Having a built-in camera on the Centauri Carbon is a huge convenience for remote monitoring. I can check on prints without being physically there which is super helpful.
See more
Frame Type
What is the frame type?
0
ANYCUBIC Kobra S1
0Votes
Cartesian
0
ELEGOO Centauri Carbon
0Votes
CoreXY
vs
Frame Type
The ANYCUBIC Kobra S1 uses a Cartesian frame type, while the ELEGOO Centauri Carbon utilizes a CoreXY frame type. CoreXY designs often offer greater speed and stability due to their fixed print bed and lighter moving parts.
Mechanical structure style of the printer.
In the battle of Frame Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Frame Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Screen Resolution
What is the display resolution?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Resolution of the display screen.
Don’t keep it to yourself — be the first to react and review the
Screen Resolution on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Lighting Inside Chamber
Does it have chamber lighting?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Lighting Inside Chamber
The ELEGOO Centauri Carbon features lighting inside the chamber, a convenience not available for the ANYCUBIC Kobra S1. This lighting aids in monitoring prints and visibility within the Centauri Carbon's build area.
Chamber lighting to monitor prints in progress.
In the battle of Lighting Inside Chamber,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Lighting Inside Chamber on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Chamber Lighting Color Modes
What chamber lighting modes are available?
0
ANYCUBIC Kobra S1
0Votes
None
0
ELEGOO Centauri Carbon
0Votes
White
vs
Chamber Lighting Color Modes
The ELEGOO Centauri Carbon offers White chamber lighting color modes, whereas the ANYCUBIC Kobra S1 does not specify any color modes for chamber lighting. The Centauri Carbon provides clearer visibility inside the print area.
Options for chamber lighting colors.
In the battle of Chamber Lighting Color Modes,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Lighting Color Modes on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Manual Bed Leveling
Does it support manual bed leveling?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Support for traditional manual bed leveling.
In the battle of Manual Bed Leveling,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Manual Bed Leveling on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Motion System
What is the motion system?
0
ANYCUBIC Kobra S1
0Votes
Rods, Belts
0
ELEGOO Centauri Carbon
0Votes
Linear Rails, Belts
vs
Motion System
The ELEGOO Centauri Carbon uses a motion system with Linear Rails and Belts, which can offer greater precision and durability compared to the ANYCUBIC Kobra S1's Rods and Belts system. Linear rails generally provide smoother movement.
Mechanical motion system guiding the print head.
In the battle of Motion System,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Motion System on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Vibration Compensation
Does it support vibration compensation?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Vibration Compensation
The ELEGOO Centauri Carbon includes Vibration Compensation, a feature not specified for the ANYCUBIC Kobra S1. This helps to reduce artifacts and improve print quality by countering printer vibrations for the Centauri Carbon.
Compensation system to reduce print artifacts.
In the battle of Vibration Compensation,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Compensation on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon offers more extensive connectivity options, including USB, Wi-Fi, and LAN, while the ANYCUBIC Kobra S1 is limited to USB. The Centauri Carbon provides greater flexibility for networked environments and remote access.
Available connection types for file transfer and control.
In the battle of Connectivity Options,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Connectivity Options on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Whether use of manufacturer’s software is mandatory.
In the battle of Proprietary Software Required,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Proprietary Software Required on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Supported File Formats,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported File Formats on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Firmware Update
Does the printer support firmware updates?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
ANYCUBIC Kobra S1
The printer's firmware can be updated, allowing for performance improvements, bug fixes, and new features to be added over time.
ELEGOO Centauri Carbon
Firmware updates are supported, allowing the printer to receive new features, performance enhancements, and bug fixes to ensure it remains up-to-date and functional over time.
Indicates whether the printer supports firmware updates; important for new features and bug fixes.
In the battle of Firmware Update,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Firmware Update on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Both printers support popular slicers like Cura and PrusaSlicer, but the ANYCUBIC Kobra S1 also supports Anycubic Slicer, while the ELEGOO Centauri Carbon supports Creality Print. This gives users slightly different native slicing software options.
Slicer programs that are compatible with the printer.
In the battle of Supported Slicers,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Slicers on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Remote Monitoring
Does it support remote monitoring?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Remote Monitoring
The ELEGOO Centauri Carbon supports remote monitoring, a feature not available for the ANYCUBIC Kobra S1. This allows users of the Centauri Carbon to check on print progress from a distance.
Ability to monitor prints remotely via app or web.
In the battle of Remote Monitoring,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Monitoring on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Cloud-Based Software
Does it support cloud-based software?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Cloud-Based Software
The ELEGOO Centauri Carbon utilizes cloud-based software, which is not available for the ANYCUBIC Kobra S1. This enables remote management and potentially advanced features through the cloud for the Centauri Carbon.
Indicates whether the printer uses or supports cloud software.
In the battle of Cloud-Based Software,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud-Based Software on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
File Transfer Method
What file transfer methods are supported?
0
ANYCUBIC Kobra S1
0Votes
USB, SD Card
0
ELEGOO Centauri Carbon
0Votes
USB, Wi-Fi, LAN
vs
File Transfer Method
The ELEGOO Centauri Carbon offers more modern file transfer methods like USB, Wi-Fi, and LAN, while the ANYCUBIC Kobra S1 relies on USB and SD Card. The Centauri Carbon provides more convenient wireless and network-based transfer options.
Methods available to transfer files to the printer.
In the battle of File Transfer Method,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
File Transfer Method on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Mobile App
Does it support a mobile app?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Ability to use a mobile app for control/monitoring.
In the battle of Mobile App,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Mobile App on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
API/SDK Integration
Does it support API/SDK integration?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Allows developers to integrate with APIs or SDKs.
In the battle of API/SDK Integration,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
API/SDK Integration on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Multi-Printer Fleet Control,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-Printer Fleet Control on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Time-Lapse Recording
Does it support time-lapse recording?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Time-Lapse Recording
The ELEGOO Centauri Carbon supports time-lapse recording, a creative feature not available for the ANYCUBIC Kobra S1. This allows users of the Centauri Carbon to capture the printing process.
Ability to capture time-lapse videos of prints.
In the battle of Time-Lapse Recording,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Time-Lapse Recording on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Remote Firmware Update
Does it support remote firmware updates?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Remote Firmware Update
The ELEGOO Centauri Carbon supports remote firmware updates, a convenience not specified for the ANYCUBIC Kobra S1. This allows the Centauri Carbon to be updated without direct physical intervention.
Supports updating firmware remotely.
In the battle of Remote Firmware Update,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Firmware Update on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Whether it uses a sealed resin cartridge system for easy handling.
In the battle of Resin Cartridge System,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Cartridge System on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
UV Light Source Type
What UV light source type does it use?
0
ANYCUBIC Kobra S1
0Votes
None
0
ELEGOO Centauri Carbon
0Votes
None
Type of UV light source used to cure resin layers.
In the battle of UV Light Source Type,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
UV Light Source Type on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
UV Power Output
What is the UV power output?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Strength of UV light exposure affecting curing speed and accuracy.
Don’t keep it to yourself — be the first to react and review the
UV Power Output on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Resin Layer Curing Speed
What is the resin layer curing speed?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Time required to cure one resin layer.
Don’t keep it to yourself — be the first to react and review the
Resin Layer Curing Speed on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Resin Tank Lifetime
What is the resin tank lifetime?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Approximate number of prints before resin tank replacement.
Don’t keep it to yourself — be the first to react and review the
Resin Tank Lifetime on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Auto Resin Mixing
Does it have auto resin mixing?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Whether resin is automatically mixed during operation for consistency.
In the battle of Auto Resin Mixing,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Resin Mixing on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Resin Heating System
Does it have a resin heating system?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Whether the printer can heat resin for optimal viscosity.
In the battle of Resin Heating System,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Heating System on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Wash Time
What is the wash time?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Typical duration to wash prints in post-processing.
Don’t keep it to yourself — be the first to react and review the
Wash Time on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Cure Time
What is the cure time?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Typical duration to fully cure resin prints after washing.
Don’t keep it to yourself — be the first to react and review the
Cure Time on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Post-Processing Equipment Compatibility
Is it compatible with post-processing equipment?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Whether the printer supports integration with wash/cure stations.
In the battle of Post-Processing Equipment Compatibility,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Post-Processing Equipment Compatibility on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Prevents accidental access to the chamber while printing.
In the battle of Enclosure Lock,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Enclosure Lock on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon features auto shutdown on error, a safety measure not specified for the ANYCUBIC Kobra S1. This helps prevent potential issues or damage by automatically turning off the Centauri Carbon if an error occurs.
Shuts printer down automatically when critical errors occur.
In the battle of Auto Shutdown on Error,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Auto Shutdown on Error on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Prevents or contains resin leaks in resin printers.
In the battle of Resin Spill Protection,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Resin Spill Protection on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
vs
Safety Sensors Count
The ANYCUBIC Kobra S1 includes 4 safety sensors, while the count for the ELEGOO Centauri Carbon is not available. The Kobra S1 offers a clear indication of its safety monitoring capabilities.
Number of safety sensors installed in the printer.
Don’t keep it to yourself — be the first to react and review the
Safety Sensors Count on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Safety Certifications
What safety certifications does it have?
0
ANYCUBIC Kobra S1
0Votes
CE, FCC
0
ELEGOO Centauri Carbon
0Votes
CE, FCC
Official safety standards the printer complies with.
In the battle of Safety Certifications,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Safety Certifications on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Emergency Stop Button
Does it have an emergency stop button?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Dedicated button to stop the printer instantly in emergencies.
In the battle of Emergency Stop Button,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Emergency Stop Button on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Fireproof Build Plate
Does it have a fireproof build plate?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Build plate is resistant to fire for extra safety.
In the battle of Fireproof Build Plate,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Fireproof Build Plate on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Overheat Protection
Does it feature overheat protection?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Shuts down printer when components exceed safe temps.
In the battle of Overheat Protection,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Overheat Protection on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Child Lock Mode
Does it have a child lock mode?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
A setting that prevents unauthorized or unsafe use by children.
In the battle of Child Lock Mode,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Child Lock Mode on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Air Quality Compliance
Is it compliant with air quality standards?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Meets air quality standards for emissions and filtration.
In the battle of Air Quality Compliance,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Air Quality Compliance on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
In the battle of Supported Mod Kits,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Supported Mod Kits on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon features self-diagnostics, a helpful maintenance capability not specified for the ANYCUBIC Kobra S1. This allows the Centauri Carbon to identify potential issues automatically.
Printer can analyze itself for common faults and errors.
In the battle of Self-Diagnostics,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Self-Diagnostics on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Nozzle Replaceable
Is the nozzle replaceable?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Specifies if the nozzle can be replaced with different sizes or when worn.
In the battle of Nozzle Replaceable,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Nozzle Replaceable on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Spare Parts Availability
Are spare parts available?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Whether spare parts are readily available for purchase.
In the battle of Spare Parts Availability,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Spare Parts Availability on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Upgrade Options
What upgrade options are supported?
0
ANYCUBIC Kobra S1
0Votes
None
0
ELEGOO Centauri Carbon
0Votes
None
Supported upgrade kits and modules for expanding functionality.
In the battle of Upgrade Options,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Upgrade Options on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Maintenance Reminders
Does it provide maintenance reminders?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Automated alerts to schedule maintenance tasks.
In the battle of Maintenance Reminders,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Maintenance Reminders on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Predicts potential failures and alerts the user before issues arise.
In the battle of Predictive Maintenance Alerts,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Maintenance Alerts on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Tool-Free Maintenance
Is tool-free maintenance supported?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Allows key maintenance tasks without tools.
In the battle of Tool-Free Maintenance,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Tool-Free Maintenance on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Service Interval
What is the service interval?
Who knows?
0Votes
ANYCUBIC Kobra S1
(Help us out by suggesting one!)
Who knows?
0Votes
ELEGOO Centauri Carbon
(Help us out by suggesting one!)
Recommended time between major servicing.
Don’t keep it to yourself — be the first to react and review the
Service Interval on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Lubrication Required
Does it require lubrication?
Yes
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
Indicates if lubrication is needed for smooth operation.
In the battle of Lubrication Required,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Lubrication Required on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Business & Professional Features
10
Print Farm Management
Does it support print farm management?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Indicates if multiple printers can be networked and managed as a farm.
In the battle of Print Farm Management,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Farm Management on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Cloud Fleet Management
Does it support cloud fleet management?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Ability to manage multiple devices remotely via cloud software.
In the battle of Cloud Fleet Management,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Cloud Fleet Management on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Workflow Integration
Does it integrate with workflows?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Integration with professional workflow tools and design platforms.
In the battle of Workflow Integration,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Workflow Integration on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Multi-User Profiles
Does it support multi-user profiles?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Allows multiple users to have distinct profiles and permissions.
In the battle of Multi-User Profiles,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Multi-User Profiles on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Remote Access Control
Does it support remote access control?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Remote Access Control
The ELEGOO Centauri Carbon offers remote access control, a feature not available for the ANYCUBIC Kobra S1. This allows users to manage and control the Centauri Carbon from a distance.
Ability to control printer access remotely with permissions.
In the battle of Remote Access Control,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Access Control on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Enterprise Security Features
Does it have enterprise security features?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Advanced security measures like encryption, secure login, and permissions.
In the battle of Enterprise Security Features,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Enterprise Security Features on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Licensing Options
Are licensing options available?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Availability of enterprise licensing for organizations.
In the battle of Licensing Options,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Licensing Options on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Provides usage statistics and analytics for tracking productivity and costs.
In the battle of Usage Analytics Dashboard,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Usage Analytics Dashboard on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
SLA & Support Contracts
Are SLA or support contracts available?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Option for service-level agreements and premium support contracts.
In the battle of SLA & Support Contracts,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
SLA & Support Contracts on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Estimates printing costs (material, power, time) before job start.
In the battle of Predictive Cost Estimation,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Cost Estimation on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The printer includes bed temperature sensors, allowing for precise control and monitoring of the heated print bed to optimize adhesion and prevent warping.
ELEGOO Centauri Carbon
The inclusion of bed temperature sensors ensures precise and consistent heating across the build plate, which is crucial for successful adhesion and print quality.
Detects and regulates the build plate temperature.
In the battle of Bed Temperature Sensors,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Bed Temperature Sensors on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
The ELEGOO Centauri Carbon offers print log storage, which is not specified for the ANYCUBIC Kobra S1. This feature allows the Centauri Carbon to keep a record of print history and events.
Records print job history and diagnostic data.
In the battle of Print Log Storage,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Print Log Storage on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Vibration Sensor
Does it include a vibration sensor?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Vibration Sensor
The ELEGOO Centauri Carbon includes a vibration sensor, a component not specified for the ANYCUBIC Kobra S1. This sensor contributes to the Centauri Carbon's vibration compensation features, improving print quality.
Detects vibrations and compensates for print accuracy.
In the battle of Vibration Sensor,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Vibration Sensor on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Remote Error Alerts
Does it provide remote error alerts?
No
0Votes
ANYCUBIC Kobra S1
Yes
0Votes
ELEGOO Centauri Carbon
vs
Remote Error Alerts
The ELEGOO Centauri Carbon provides remote error alerts, a useful notification feature not available for the ANYCUBIC Kobra S1. This allows users of the Centauri Carbon to be informed of issues even when away from the printer.
Sends error notifications to remote devices.
In the battle of Remote Error Alerts,
ANYCUBIC Kobra S1 ◉ is
worse than
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Remote Error Alerts on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Predictive Failure Logs
Does it support predictive failure logs?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Tracks and predicts potential failures before they occur.
In the battle of Predictive Failure Logs,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Predictive Failure Logs on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Calibration History Log
Does it have a calibration history log?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Stores history of calibration for quality control.
In the battle of Calibration History Log,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Calibration History Log on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Sensor Count
How many sensors are included?
0
ANYCUBIC Kobra S1
0Votes
4
0
ELEGOO Centauri Carbon
0Votes
Multiple
vs
Sensor Count
The ANYCUBIC Kobra S1 specifies a total of 4 sensors, whereas the ELEGOO Centauri Carbon indicates 'Multiple' sensors. The Centauri Carbon likely has more sensing capabilities for monitoring various aspects of printing.
total number of sensors installed in the printer.
In the battle of Sensor Count,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Sensor Count on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Tracks and maintains chamber temperature for consistent prints.
In the battle of Chamber Temperature Sensors,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Chamber Temperature Sensors on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Filament Jam Detection
Does it support filament jam detection?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Detects blockages or jams in the filament path.
In the battle of Filament Jam Detection,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Filament Jam Detection on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0Votes
ANYCUBIC Kobra S1
No
0Votes
ELEGOO Centauri Carbon
Monitors extrusion pressure to prevent under- or over-extrusion.
In the battle of Extruder Pressure Sensor,
ANYCUBIC Kobra S1 ◉ is
same as
ELEGOO Centauri Carbon ◉
.
Don’t keep it to yourself — be the first to react and review the
Extruder Pressure Sensor on ANYCUBIC Kobra S1 ◉
vs ELEGOO Centauri Carbon ◉ and help others decide!
Surveys
Because hot takes deserve votes.
Printing Speed
How would you rate the printing speed of this 3D printer?
Lightning fast — Under 2 hours
0Votes
0Votes
Very fast — 2 to 5 hours
0Votes
0Votes
Fast — 5 to 10 hours
0Votes
0Votes
Moderate speed — 10 to 20 hours
0Votes
0Votes
Very slow — Over 20 hours
0Votes
0Votes
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Ultra fine detail — Layer height below 0.05 mm
0Votes
0Votes
Fine detail — Layer height 0.05 to 0.1 mm
0Votes
0Votes
Good detail — Layer height 0.1 to 0.2 mm
0Votes
0Votes
Decent detail — Layer height 0.2 to 0.3 mm
0Votes
0Votes
Rough and basic — Layer height above 0.3 mm
0Votes
0Votes
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Extra large projects — Over 400 mm each side
0Votes
0Votes
Large projects — 300 to 400 mm each side
0Votes
0Votes
Medium projects — 200 to 300 mm each side
0Votes
0Votes
Small projects — 150 to 200 mm each side
0Votes
0Votes
Tiny prints only — Under 150 x 150 x 150 mm
0Votes
0Votes
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Very efficient — Under 50 grams per model
0Votes
0Votes
Efficient — 50 to 70 grams per model
0Votes
0Votes
Decent efficiency — 70 to 100 grams per model
0Votes
0Votes
Average efficiency — 100 to 150 grams per model
0Votes
0Votes
Wasteful — Over 150 grams per model
0Votes
0Votes
Noise Level
How noisy is this 3D printer during operation?
Whisper quiet
0Votes
0Votes
Quiet most of the time
0Votes
0Votes
Manageable with background noise
0Votes
0Votes
Noticeable but tolerable
0Votes
0Votes
Loud and distracting
0Votes
0Votes
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Very durable — Over 5 years
0Votes
0Votes
Long lasting — 3 to 5 years
0Votes
0Votes
Decent lifespan — 2 to 3 years
0Votes
0Votes
Short lifespan — 1 to 2 years
0Votes
0Votes
Breaks down quickly — Under 1 year
0Votes
0Votes
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Excellent — Consistently produces high-quality prints with no issues
0Votes
0Votes
Good — Produces quality prints with minor inconsistencies
0Votes
0Votes
Average — Prints are acceptable with occasional issues
0Votes
0Votes
Below average — Frequent print failures or inconsistencies
0Votes
0Votes
Poor — Often fails to produce quality prints
0Votes
0Votes
Ease of Setup
How easy was the setup process for this 3D printer?
Very easy — The printer was simple to set up with clear instructions and minimal effort
0Votes
0Votes
Easy — Setup was straightforward, with only a few minor adjustments needed
0Votes
0Votes
Average — Setup was manageable but took time and required some troubleshooting
0Votes
0Votes
Challenging — Setup was difficult and required assistance from support or additional resources
0Votes
0Votes
Very difficult — Setup was complicated, with unclear instructions and many issues during the process
0Votes
0Votes
Pricing
How would you rate the pricing for this 3D printer?
Great value for money — Offers excellent features and performance at an affordable price
0Votes
0Votes
Pretty good price — Decent pricing for the features, a reasonable value
0Votes
0Votes
Fair deal — The price is acceptable but might be slightly high for the features offered
0Votes
0Votes
Kinda pricey — The price feels a bit high compared to similar models
0Votes
0Votes
Crazy expensive — The price is significantly higher than other options with similar features
0Votes
0Votes
Design Appeal
How would you rate the design appeal of this 3D printer?
Excellent — Sleek, modern design that looks great in any workspace
0Votes
0Votes
Good — Attractive and functional design that fits well in most environments
0Votes
0Votes
Average — Standard design with no particular standout features
0Votes
0Votes
Fair — Design feels bulky or outdated, but still serves its purpose
0Votes
0Votes
Poor — Unattractive design, clunky and may be an eyesore in most spaces
Supermod
Moderator
Recaptor
0
Cartling
